On state
Illuminated in blue
The speaker is switched on, connected to a Hub or Connect, and an audio signal is played back.
Xeo 20 User manual
Status LEDs on the front
The two LEDs in the upper left corner of the cabinet front indicate the operational state of the speakers and system with various colours and blinking functions.
On state
Slow blinking in blue
The speaker is switched on, connected to a Hub or Connect, but an audio signal cannot be found.
On state
Illuminated in purple
The speaker is switched on, connected to a local input, and an audio signal is played back.
On state
Slow blinking in purple
The speaker is switched on, connected to a local input, but an audio signal cannot be found.
Connection
Slow blinking in red
There is no active transmitter (Hub, Connect, mobile device…) / master, or a connection is not possible.
Search
Fast blinking in blue for 20 min
Searching for an active input.
Synchronisation / Connection
Fast blinking in red for 10 s
System synchronization during no transmitter (Hub, Connect, mobile device…) / master connection.
Synchronisation / Connection
Blue LED is turned off for 0.2 s
New transmitter (Hub, Connect, mobile device…) ID, transmitter input, or a direct input is selected.
Synchronisation / Connection
Illuminated in red for 5 s
Receiver mode is changing.
Synchronisation / Connection
Illuminated in white
A Bluetooth connection is established.
Synchronisation / Connection
Slow blinking in white
The speaker is in pairing mode.
Firmware loading
White LED: slow to fast blinking during the load sequence, Red LED: illuminated
Speaker firmware is being loaded.
Volume
Fast blinking in blue
The speaker volume is being adjusted.
Mute
Fading in and out
The speaker is muted.
Off state
Illuminated dimly in red
The speaker is in standby mode.
LED Blinking Codes
Off
Illuminated in white
Illuminated in a colour
Slow blinking (1 or 2 Hz)
Fast blinking (3 or 4 Hz)